Power Mirror Motor Test
NOTE:
Mirror motor connectors may vary in configuration from vehicle to vehicle of the same model.
Disconnect power mirror motor harness connector. Using 12-volt power source, connect positive and negative leads to specified pins or terminals. See appropriate POWER MIRROR MOTOR TEST table. See Figure- Figure . If power mirror motor fails any test, replace power mirror assembly.
POWER MIRROR MOTOR TEST
| Apply 12 Volts To Pin No. | (1) Ground Pin No. | Mirror Operation | ||
|---|---|---|---|---|
| 2 | 3 | Up | ||
| 3 | 2 | Down | ||
| 1 | 3 | Left | ||
| 3 | 1 | Right | ||
|
||||