Continuity Test

Disconnect combination switch connectors. Check for continuity between specified wiper switch terminals. See WIPER/WASHER SWITCH CONTINUITY table. See Fig 1. If continuity is not as specified, replace combination switch.

WIPER/WASHER SWITCH CONTINUITY

Switch Position

Continuity Between Terminals

Wiper Off

Mist Off ⁽¹⁾

B8 & B17

Mist On ⁽²⁾

A9 & B8

Wiper Intermittent

Mist Off ⁽¹⁾

B8 & B17

Mist On ⁽²⁾

A9 & B8

Wiper Low

A9 & B8

Wiper High

Mist Off ⁽¹⁾

A8 & A9

Mist On ⁽²⁾

A8, A9 & B8

Washer

Off

⁽³⁾

A6 & A13

⁽¹⁾	Lever in normal position.

⁽²⁾	Pull lever toward you.

⁽³⁾	No continuity between terminals A6 and A13.

Fig 1: Identifying Wiper Switch Terminals