Camshaft Position (CMP) Sensor: Installation

Install NEW engine oil dipstick guide "O" ring. Apply soapy water to "O" ring, before installation. Install NEW A/T oil dipstick guide "O" ring. To complete installation, reverse removal procedure. Tighten all nuts and bolts to specification. See TORQUE SPECIFICATIONS .

Fig 1: Exploded View Of Air Intake Chamber & Fuel Rail Components (GS300)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

To complete installation, reverse removal procedure. Refill cooling system and check for leaks. Check ignition timing. See ON-VEHICLE ADJUSTMENTS article.

Refill cooling system and check for leaks. To complete installation, reverse removal procedure. Check ignition timing. See ON-VEHICLE ADJUSTMENTS article.

Install NEW brake booster union and air intake chamber gaskets. Install NEW intake manifold gasket. Route water by-pass hose between No. 2 and 3 intake ports of manifold and fuel rail. Install NEW engine oil dipstick guide "O" ring.
Apply soapy water to "O" ring, before installation. Install NEW A/T oil dipstick guide "O" ring. To complete installation, reverse removal procedure. Tighten all nuts and bolts to specification. See TORQUE SPECIFICATIONS .

Fig 1: Exploded View Of Air Intake Chamber & Fuel Rail Components (SC300)