September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Transmission Control Switch
Disconnect transmission control switch connector. Using ohmmeter, check continuity between specified terminals. See TRANSMISSION CONTROL SWITCH CONTINUITY table. Replace switch as necessary.
TRANSMISSION CONTROL SWITCH CONTINUITY
| Selector Lever Position |
Terminals No. |
Continuity |
| GS300 & GS400 |
| "D" |
2 & 5 |
No |
| "4" (6-Cyl.) |
2 & 5 |
Yes |
| "M" (V8) |
2 & 5 |
Yes |
| "2" |
3 & 9 |
No |
| "L" |
3 & 9 |
Yes |
| LS400 & SC400 |
| "D" |
1 & 2 |
No |
| "4" |
1 & 2 |
Yes |
| "2" |
4 & 5 |
No |
| "L" |
4 & 5 |
Yes |
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002