Valve Body Assembly: Installation

To install, reverse removal procedure. Ensure check ball body and spring are installed above valve body. Ensure manual shift lever in transmission case aligns with manual valve of valve body.
Install accumulator piston springs and spacers in original location. See TRANSMISSION REASSEMBLY . Proper length bolts must be installed in designated areas. See Fig 1. Use NEW "O" ring on solenoid, oil strainer and gasket if necessary. Install magnets in oil pan. Install pan with NEW gasket. Fill fluid to proper level.

Fig 1: Identifying Valve Body Mounting Bolt Locations

Fig 2: Locating Check Ball Body & Spring