LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2001 >> IS 300 >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Anti-Theft Systems >> Circuit Tests >> Key Unlock Warning Switch Circuit
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Key Unlock Warning Switch Circuit

  1. Key unlock warning switch is built into ignition key cylinder. Turn ignition off. Disconnect key unlock warning switch connector. Using an ohmmeter, check continuity between key unlock warning switch terminals. With key inserted (switch on), continuity should exist. With key removed (switch off), continuity should not exist. If continuity is as specified, go to next step. If continuity is not as specified, replace key unlock warning switch.
  2. Check circuits for faults between key unlock warning switch, anti-theft ECU and body ground. See WIRING DIAGRAMS . Repair or replace as necessary. If circuits are okay, check anti-theft ECU pin voltages. See ANTI-THEFT ECU PIN VOLTAGE TESTS  under COMPONENT TESTS. Replace components as necessary and retest system operation.
scientia non olet · About LEMON Manuals