Body No. 5 Ecu Power Source Circuit
- Check MPX-B3 fuse located in passenger-side junction block. Replace fuse as necessary. If fuse is okay, go to next step. If fuse is faulty, replace appropriate fuse and retest system operation.
- Ensure ignition is off. Disconnect body No. 5 ECU connector. Measure voltage between body No. 5 ECU connector terminals No. 29 and 25. See PIN VOLTAGE TESTS . If 10-14 volts are not present, go to next step. If 10-14 volts are present, go to next test listed in appropriate SYMPTOM DIAGNOSIS table under TROUBLE SHOOTING .
- Check wiring between body No. 5 ECU and ground. Repair wiring as necessary. If wiring is okay, check wiring between body No. 5 ECU and battery. Repair as necessary.