Headlight Circuit
NOTE:
If LEXUS scan tool is available, start test from step 1. If this scan tool is not available, start test from step 2.
- Using scan tool, operate headlight in ACTIVE TEST. If headlight does not operate, go to next step. If headlight operates, go to next test listed in BODY NO. 2 CONTROL SYSTEM table under TROUBLE SHOOTING .
- Check H-LP HI fuse located in engine room junction block. Replace fuse as necessary. If fuse is okay, ensure ignition is off. Disconnect body No. 5 ECU connector. Measure voltage between connector terminals No. 12 and 25. See PIN VOLTAGE TESTS . If 10-14 volts are present, go to next test listed in BODY NO. 2 CONTROL SYSTEM table under TROUBLE SHOOTING . If 10-14 volts are not present, check headlight bulb. Replace bulb as necessary. If bulb is okay, check circuits for faults between headlights, body No. 5 ECU and battery. See WIRING DIAGRAMS . Repair or replace as necessary.