DTC P0325 Or DTC P0330: Notes

Code Definition

DTC P0325: Knock Sensor No. 1 Circuit
DTC P0330: Knock Sensor No. 2 Circuit

CAUTION: If ECM replacement is instructed in following testing, always ensure ECM connectors and ground circuit are okay. If either are suspect, repair and repeat testing to confirm ECM malfunction. If ECM is replaced, ECM must be programmed with proper ignition key code for engine immobilizer system. For programming procedures, see COMPUTER RELEARN PROCEDURES - IMPORT article in GENERAL INFORMATION, or appropriate ENGINE IMMOBILIZER SYSTEMS article in ACCESSORIES & EQUIPMENT.

NOTE: For component location, see appropriate illustration in THEORY & OPERATION article.