Customer Supplied 2 Or More Valid Keys
- Cut new transponder equipped key(s). Using first key, turn ignition switch to ON position, then LOCK position 5 times. DO NOT leave key in either position for more than one second. Turn first key to ON position. SECURITY light should illuminate. Turn first key to LOCK position and remove from ignition. SECURITY light should go out.
- Using second key, start engine. SECURITY light should illuminate for 1-2 seconds and engine should continue to run. Turn second key to LOCK position and remove key.
- Repeat step 2 with first key. Repeat step 2 with third key. Repeat step 2 with each new or valid key, up to 8 keys total. Waiting 30 seconds will cause program to quit automatically.