LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2002 >> GS 430 >> Repair and Diagnosis >> Body & Frame >> Power Windows >> Component Tests >> Jam Protection Pulse Switch (Rear)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Jam Protection Pulse Switch (Rear)

CAUTION: If connecting the wire harness wrongly, the sensor might be damaged so caution is necessary.
  1. Inspect the jam protection pulse switch operation.
  2. Connect the positive (+) lead from the TOYOTA electrical tester to terminal No. 3 and the negative (-) lead to terminal No. 5. See CONNECTOR IDENTIFICATION .
  3. On the rear left door, connect the positive (+) lead from the battery to terminal No. 2 and the negative (-) lead to terminal No. 1.
  4. On the rear right door, connect the positive (+) lead from the battery to terminal No. 1 and the negative (-) lead to terminal No. 2.
  5. Check that a pulse is generated while the motor is running.
  6. Reverse the polarity and check that a pulse is generated.
  7. If a pulse is not generated, replace the motor. See REAR DOOR POWER WINDOW REGULATOR  under COMPONENT TESTS.
scientia non olet · About LEMON Manuals