LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2002 >> IS 300 Base, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Multiplex Communication System >> Self-Diagnostic System >> Retrieving Diagnostic Trouble Codes >> Using Hand-Held Tester
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Using Hand-Held Tester

NOTE: DTCs are 4 digit numbers.
  1. Prepare the hand-held tester and connect it to DLC3 located under the lower finish panel of the instrument panel. See Fig 1.
  2. Turn the ignition switch ON and switch the hand-held tester main switch ON.
  3. Use the hand-held tester to check the DTCs then write them down. For operating instructions, see the hand-held tester instruction book.
  4. Confirm the details of the DTCs. See DIAGNOSTIC TROUBLE CODE INDEX .
Fig 1: Connecting Hand-Held Tester To DLC3
G00201861Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals