LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2002 >> IS 300 Base, Automatic >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Remote Keyless Entry >> Circuit Tests >> Wireless Door Lock Control Receiver Circuit
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Wireless Door Lock Control Receiver Circuit

  1. For circuit inspection, see WIRELESS DOOR LOCK CONTROL RECEIVER CIRCUIT under CIRCUIT TESTS in BODY CONTROL SYSTEM article.
  2. Connector Disconnected -  Disconnect the connector from the receiver and inspect the connector on the wire harness side. See CONNECTOR IDENTIFICATION  and INSPECTING WIRELESS DOOR LOCK CONTROL RECEIVER CIRCUIT (CONNECTOR DISCONNECTED)  . If the circuit is not as specified, inspect the circuit connected to other parts.
    INSPECTING WIRELESS DOOR LOCK CONTROL RECEIVER CIRCUIT (CONNECTOR DISCONNECTED)

    Tester Connection Condition Specified Condition
    1 - Ground Constant Continuity
    5 - Ground Constant B+ Voltage
  3. Connector Connected -  Connect the wire harness side connector to the receiver and inspect the wire harness side connector from the back side. See INSPECTING WIRELESS DOOR LOCK CONTROL RECEIVER CIRCUIT (CONNECTOR CONNECTED) . If the circuit is as specified, replace the receiver. If the circuit is not as specified, inspect the circuits connected to other parts.
    INSPECTING WIRELESS DOOR LOCK CONTROL RECEIVER CIRCUIT (CONNECTOR CONNECTED)

    Tester Connection Condition Specified Condition
    3 - Ground Constant B+ Voltage
    2 - Ground All Doors Closed, Transmitter OFF To ON 0-6 Volts To 0 Volt
scientia non olet · About LEMON Manuals