LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2002 >> IS 300 Base, Automatic >> Repair and Diagnosis >> Electrical >> Gauges >> Instrument Panel >> Component Tests >> Vehicle Speed Sensor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Vehicle Speed Sensor

  1. Connect the positive (+) lead from the battery to terminal No. 1 and negative (-) lead to terminal No. 2. See CONNECTOR IDENTIFICATION .
  2. Connect the positive (+) lead from the tester to terminal No. 3 and negative (-) lead to terminal No. 2. Rotate the shaft.
  3. Check that there is a voltage change from approximately 0 volt to 11 volts or more between terminals No. 2 and 3. The voltage change should be 4 times for every revolution of the speed sensor shaft.
  4. If operation is not as specified, replace the sensor. See VEHICLE SPEED SENSOR under ENGINE SENSORS & SWITCHES in appropriate REMOVAL, OVERHAUL & INSTALLATION article in ENGINE PERFORMANCE.
scientia non olet · About LEMON Manuals