DTC P0440: EVAP System Malfunction: Notes
CAUTION:
If ECM replacement is instructed in following testing, always ensure ECM harness connector and ground circuit are okay. If either are suspect, repair and repeat testing to confirm ECM malfunction. If ECM is replaced, ECM must be programmed with proper ignition key code for engine immobilizer system. For programming procedures, see COMPUTER RELEARN PROCEDURES - IMPORT
article in GENERAL INFORMATION.
NOTE:
Vapor canister and some related components can be accessed through trunk by removing trunk floor mat and protective access cover at front of trunk. For component location, see appropriate illustration in THEORY & OPERATION
article.