LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2002 >> IS 300 Base, Standard >> Repair and Diagnosis >> Steering >> Steering Column >> Steering System >> Power Steering Gear >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Power Steering Gear: Removal

  1. PLACE FRONT WHEELS FACING STRAIGHT AHEAD 
  2. REMOVE STEERING WHEEL PAD (See  REMOVAL  ) 
  3. REMOVE STEERING WHEEL (See  REMOVAL  ) 
  4. REMOVE RH AND LH FRONT BRAKE CALIPERS (See  FRONT BRAKE CALIPER  ) 
  5. DISCONNECT RH AND LH TIE ROD ENDS 
  6. REMOVE NO. 2 ENGINE UNDER COVER 
  7. DISCONNECT SLIDING YOKE (See  REMOVAL  ) 
  8. REMOVE FRONT SUSPENSION MEMBER BRACE 

    Remove the 8 bolts and front suspension member brace.

    Fig 1: Removing Front Suspension Member Brace Bolts
    G01180748Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  9. DISCONNECT PRESSURE FEED TUBE 

    Remove the union bolt and gasket, and disconnect the pressure feed tube.

    Fig 2: Disconnecting Pressure Feed Tube
    G01180749Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  10. DISCONNECT RETURN TUBE 

    Using SST, disconnect the return tube.

    SST 09023-38400

    Fig 3: Disconnecting Return Tube
    G01180750Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  11. REMOVE PS GEAR ASSEMBLY, BRACKET AND GROMMET 

    Remove the 4 bolts, PS gear assembly, bracket and grommet.

scientia non olet · About LEMON Manuals