Removal & Installation

WARNING: This page is about a different car, the 2003 Lexus GX 470. However, it is still accessible from the selected car via links, so may be relevant.

Remove screw. Disengage 3 clips and remove instrument panel under cover No. 2. See Fig 1.
Disengage 4 clips and remove instrument panel ornament. See Fig 2.
Remove 5 screws, disengage 2 clips and remove glove compartment door assembly. See Fig 3.
Disconnect 5 ECM connectors from ECM. Remove 3 nuts and ECM. See Fig 4. Remove screws and ECM brackets from ECM.
To install, reverse removal procedure. Tighten nuts to specification. See TORQUE SPECIFICATIONS .

Fig 1: Removing Instrument Panel Under Cover No. 2

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Fig 2: Removing Instrument Panel Ornament

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Fig 3: Removing Glove Compartment Door Assembly

Fig 4: Removing Engine Control Module