Air Conditioning Control Assembly: Removal

WARNING: This page is about a different car, the 2003 Lexus LX 470. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE CENTER CLUSTER FINISH PANEL
Disengage the 9 clips and remove the center cluster finish panel, then disconnect the connector.

Fig 1: Removing Center Cluster Finish Panel Clips
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE CENTER RESISTORS
Disengage the 6 clips and remove the center resistors both side.

Fig 2: Removing Center Resistors Clips
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE INTEGRATION CONTROL PANEL ASSEMBLY
1. Remove the 4 bolts.
2. Disengage the 7 clips and remove the integration control panel assembly, then disconnect the connectors.
  
  Fig 3: Removing Integration Control Panel Assembly Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
w/LEXUS navigation system: REMOVE A/C AMPLIFIER
1. Disconnect the connector clamp.
2. Remove the 3 screws, the 4 bolts and the radio receiver bracket LH.
  
  Fig 4: Removing Screws And Bolts Of Radio Receiver Bracket LH
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Remove the 2 screws and the A/C amplifier.
  
  Fig 5: Removing Screws And A/C Amplifier
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
w/LEXUS navigation system: REMOVE EMV
Remove the 2 screws, the 2 bolts and the EMV.

Fig 6: Removing 2 Screws 2 Bolts And EMV
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
w/LEXUS navigation system: REMOVE INTEGRATION CONTROL PANEL
1. Disconnect the connector clamps.
2. Remove the screw, the 2 bolts and the radio receiver bracket RH.
3. Remove the integration control panel from the radio receiver.
  
  Fig 7: Removing Screw And Bolts Of Radio Receiver Bracket RH
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
w/o LEXUS navigation system: REMOVE INTEGRATION CONTROL PANEL
1. Disconnect the connector clamp.
2. Remove the 6 bolts and the radio receiver bracket LH.
  
  Fig 8: Removing 6 Bolts And Radio Receiver Bracket LH
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Disconnect the connector clamp.
4. Remove the 6 bolts and the radio receiver bracket RH.
5. Remove the integration control panel.
  
  Fig 9: Removing 6 Bolts And Radio Receiver Bracket RH
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002