Accelerator Pedal Rod ASSY: Replacement

WARNING: This page is about a different car, the 2004 Lexus LS 430. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE ACCELERATOR PEDAL ROD ASSY
1. Disconnect the accelerator pedal position sensor connector.
2. Remove the 2 bolts, 2 nuts and accelerator pedal rod.
  
  Fig 1: Removing Accelerator Pedal Rod Assy
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL ACCELERATOR PEDAL ROD ASSY
1. Connect the accelerator pedal position sensor connector.
2. Install the accelerator pedal rod with the 2 bolts and 2 nuts.
Torque: 7.5 N.m (76.5 kgf.cm, 66 in.lbf)