Cruise Control Main Switch ASSY: Replacement
WARNING: This page is about a different car, the 2004 Lexus LS 430. However, it is still accessible from the selected car via links, so may be relevant.
- SEPARATE BATTERY NEGATIVE TERMINAL
- REMOVE SWITCH & VOLUME CASE
- REMOVE STEERING WHEEL COVER LOWER NO.2
- REMOVE HORN BUTTON ASSY (SEE HORN SYSTEM )
- REMOVE STEERING WHEEL ASSY (SEE OVERHAUL )
- REMOVE CRUISE CONTROL MAIN SWITCH ASSY
- Remove the 2 screws and steering wheel damper.
- Disconnect the connectors.
- Remove screw (A) and disengage the claw.
- Remove 2 screws (B) and the steering wheel LWR cover.
- Remove the 2 screws and cruise control main switch assy.
- INSPECT STEERING WHEEL CENTER POINT
- INSTALL STEERING WHEEL ASSY (SEE OVERHAUL )
- INSTALL HORN BUTTON ASSY (SEE HORN SYSTEM )
- CONNECT BATTERY NEGATIVE TERMINAL
- INSPECT HORN BUTTON ASSY
- INSPECT SRS WARNING LIGHT