Automatic Transmission Unit: Installation

Using Calipers And A Straight Edge, Measure From The Installed Surface Of The Torque Converter Clutch To The Front Surface Of The Transmission Housing.

Correct Distance: More Than 17.1 Mm (0.673 In.) 

If The Distance Is Less Than The Standard, Check For An Improper Installation.

Fig 1: Measuring Torque Converter Clutch To Front Surface Of Transmission Housing

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Installation Is In The Reverse Order Of Removal (See  removal  ). 

Hint:

After Installation, Check And Inspect Items As Follows.

• Adjust The Shift Lever Position (See Pre-Check ).
• Check Fluid Level (See Pre-Check ).
• Do The Road Test (See Pre-Check ).