Stop Light Switch
Inspect the stop light switch continuity. See CONNECTOR IDENTIFICATION . See INSPECTING STOP LIGHT SWITCH CONTINUITY table. If continuity is not as specified, replace the switch. See STOP LIGHT SWITCH under REMOVAL & INSTALLATION.
INSPECTING STOP LIGHT SWITCH CONTINUITY
| Switch Position | Tester Connection | Specified Condition |
|---|---|---|
| Switch Pin Free (Pedal Depressed) | 1 - 2 | Continuity |
| Switch Pin Pushed In (Pedal Released) | ..... | No Continuity |
| Switch Pin Free (Pedal Depressed) | ..... | No Continuity |
| Switch Pin Pushed In (Pedal Released) | 3 - 4 | Continuity |