Wireless Door Lock Transmitter Battery: Installation
CAUTION:
- Do not replace the battery with wet hands. Water may cause unexpected rust.
- Do not touch or move any components inside the transmitter, or it may interfere with proper operation.
- Be careful not to bend the electrode of the battery insertion and that dust or oils do not adhere to the inside of the module.
- Take care not to damage or bend the "O" ring when installing.
NOTE:
- Take care not to lose the screws and "O" ring.
- Make sure the positive side and negative side of the battery should be faced correctly.
- Put in a new battery with the positive side up.
- Check that the "O" ring is not distorted or has slipped off.
- Install the lid with 2 screws.
- Install the module into the key frame and secure the cover with the screw.
- When pushing any switch on the wireless key, make sure the indicator light comes on.
NOTE:
When the screws are tightened loosely, it might cause faulty contact of the lithium battery and terminals.