Power Rear Quarter Window Switch
Inspect the power quarter window switch continuity. See CONNECTOR IDENTIFICATION INSPECTING POWER QUARTER WINDOW SWITCH CONTINUITY table. If continuity is not as specified, replace the switch located on the lower No. 1 panel. See INSTRUMENT PANEL under REMOVAL & INSTALLATION under INSTRUMENT PANEL article in ACCESSORIES & EQUIPMENT.
INSPECTING POWER QUARTER WINDOW SWITCH CONTINUITY
| Switch Position | Tester Connection | Specified Condition |
|---|---|---|
| CLOSE | 3 - 6, 4 - 5 | Continuity |
| OFF | ..... | Continuity |
| OPEN | 3 - 4, 5 - 6 | Continuity |
| Illumination Circuit | 1 - 2 | Continuity |