Description & Operation: Starter

All models use 4-brush, solenoid-actuated, reduction gear type starters, equipped with overrunning clutches. The brush holder assembly retains 4 brushes and springs in the starter housing.

Reduction gear type starters contain an integral solenoid attached to drive housing, a reduction idler gear and bearing installed into starter housing, and a clutch drive assembly. The clutch drive assembly is mounted to starter housing and is driven by the reduction idler gear from armature shaft. The brush holder assembly retains 4 brushes and 4 springs in the end cover of field frame housing.

Starter relay is used to energize starter. It also uses an engine control module and park/neutral switch in the starter relay circuit. On models with an engine immobilizer system, transponder key computer is connected to power for the ignition circuit.