LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2002 >> RX 300 AWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock >> Bleeding Brake System >> Brake Actuator
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Brake Actuator

  1. Remove reservoir cap.
  2. Install special tool (09992-00242/00350) to reservoir. See Fig 1.
  3. Connect vinyl tube to bleeder screw of brake actuator. Using special tool (09992-00242/00350), apply a pressure of 14.2 psi (98.1 kpa) to reservoir.
  4. Loosen bleeder screw. Bleed air from brake actuator. Tighten bleeder screw to specification. See TORQUE SPECIFICATIONS .
  5. Check fluid level and fill if necessary.
Fig 1: Installing Special Tool To Reservoir
G00199484Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals