Setting Driving Position

1. Turn the ignition key ON and the selector lever in "P" position.
2. Adjust the driver seat to the desired position.
3. While pushing the SET button, push button 1 or 2 until the signal beeps. The beep sound means that the positions are recorded in the computer's memory.

By repeating these steps and pressing the remaining button, the driving position for another driver can be recorded.

To set a new memorized position, select the desired position and perform step  3. The previous memory will be erased and the new position will be set.

To make only slight changes to an already memorized position, the easiest way is to first activate and the memorized position, then make the desired changes and perform step  3 above.