Jam Protection Pulse Switch (Rear)
CAUTION:
Sensor may be damaged if wiring harness is connected incorrectly.
- Connect the positive (+) lead from the TOYOTA electrical tester to terminal No. 7 and the negative (-) lead to terminal No. 6. See CONNECTOR IDENTIFICATION .
- Connect the positive (+) lead from the battery to terminal No. 3 and the negative (-) lead to terminal No. 1.
- Check that a pulse is generated while the motor is running.
- Reverse the polarity and check that a pulse is generated. If operation is not as specified, replace the motor. See WINDOW REGULATOR (REAR DOOR) under REMOVAL & INSTALLATION.