LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2002 >> RX 300 FWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock >> Bleeding Brake System >> Brake Line
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Brake Line

NOTE: Bleed air from rear brake first. If front brake is bled first, rear brake air cannot be bled.
  1. Fill reservoir with brake fluid.
  2. Connect vinyl tube to brake caliper bleeder screw and place other end in a half-full container of brake fluid.
  3. Depress brake pedal several times, then loosen bleeder screw with pedal held down.
  4. When fluid starts to run out, tighten bleeder screw to specification. See TORQUE SPECIFICATIONS .
  5. Release brake pedal. Repeat  3 and  4 until all air in fluid has been bled out.
  6. Repeat procedure to bleed air out of brake line for each wheel.
  7. Check fluid level and add fluid if necessary.
scientia non olet · About LEMON Manuals