With Hand-Held Tester
- Connect hand-held tester to (DLC3). See Figure.
- Start engine and check that ABS warning light flashes. If ABS warning light does not flash, inspect ABS warning light circuit and Ts circuit. See SYSTEM TESTING .
- Keep vehicle in stationary condition on a flat surface for one second or more.
- Depress brake pedal with 33 ft.lb. (147 N) or more for one second or more.
- Let up pressure and then depress brake pedal quickly with 22 ft.lb. (98 N) or more. ABS warning light comes on for 3 seconds.
- Drive vehicle straight forward and faster than 28 MPH for several seconds. Check that ABS warning light turns off.
- Stop vehicle. Read DTCs by following prompts on tester screen. If any DTCs are retrieved, perform appropriate test. See DIAGNOSTIC TROUBLE CODE DEFINITIONS .