Power Mirror Control System - Diagnosis: Pre-Check

1. ECU DATA MONITOR
   1. Make a judgement of good or bad and find out a malfunctioning part by the data monitor.

   DRIVER SIDE J/B 

   Standard: 

   STANDARD CHART
   
   

   Item	Condition	Specified condition
   OUTER MIRROR FOIL SW	OFF --> Retract	ON --> OFF
   OUTER MIRROR RETRN SW	OFF --> Reinstate	ON --> OFF
   MIRR SEL SW L	Right/Left adjustment switch in neutral --> LEFT	ON --> OFF
   MIRR SEL SW R	Right/Left adjustment switch in neutral --> RIGHT	ON --> OFF
   MIRR POS SW L	Mirror switch in neutral --> LEFT	ON --> OFF
   MIRR POS SW R	Mirror switch in neutral --> RIGHT	ON --> OFF
   MIRR POS SW UP	Mirror switch in neutral --> UP	ON --> OFF
   MIRR POS SW DWN	Mirror switch in neutral --> DOWN	ON --> OFF

   DRIVER SEAT ECU, PASSENGER SEAT ECU 

   Standard: 

   STANDARD CHART
   
   

   Item	Condition	Specified condition
   D-MIRR MEN 1	Memorized in 1	MEN / NOT MEN
   D-MIRR MEN 2	Memorized in 2	MEN / NOT MEN
   P-MIRR MEN 1	Memorized in 1	MEN / NOT MEN
   P-MIRR MEN 2	Memorized in 2	MEN / NOT MEN
   D-MIRR MEN POS 1	Memorized in 1	0-5000
   D-MIRR MEN POS 2	Memorized in 2	0-5000
   P-MIRR MEN POS 1	Memorized in 1	0-5000
   P-MIRR MEN POS 2	Memorized in 2	0-5000
   PNP SW	Shifted in P range	ON/OFF
   NSW	Shifted in N range	ON/OFF
   VEHICLE SPD	In driving	0 <=> 255 km/h

2. ACTIVE TEST
   1. Make a judgement of good or bad and find out a malfunctioning part by the active test.

DOOR ECU 

Standard: