Inspection Procedure

INSPECT DOOR LOCK FUNCTION
1. Check all the doors can lock and unlock when the driver's door lock cylinder is operated via the key.
1. NG: GO TO POWER DOOR LOCK CONTROL SYSTEM (See HOW TO PROCEED WITH TROUBLESHOOTING )
2. OK: GO TO NEXT STEP
INSPECT POWER WINDOW FUNCTION
1. Check that the power window operates via each regulator switch.
  1. If the driver's side does not operate, proceed to "NG-A".
  2. If the passenger's side does not operate, proceed to "NG-B".
1. NG-A: GO TO FLOW CHART (See WINDOW CANNOT BE OPERATED VIA REGULATOR SWITCH IN DRIVER'S SIDE (POWER WINDOW MASTER SWITCH CIRCUIT) )
2. NG-B: GO TO FLOW CHART (See WINDOW CANNOT BE OPERATED VIA REGULATOR SWITCH IN PASSENGERS SIDE (REGULATOR SWITCH CIRCUIT) )
3. OK: GO TO NEXT STEP
INSPECT POWER WINDOW FUNCTION
1. Check that the passenger's power window operates via the remote operation of the master switch.
1. NG: GO TO FLOW CHART (See REMOTE OPERATION VIA MASTER SWITCH IS IMPOSSIBLE IN THE OTHER SEAT(OPERATION VIA EACH DOOR SWITCH IS POSSIBLE) )
2. OK: REPLACE MULTIPLEX NETWORK DOOR ECU FRONT LH