Power Window Control System - Diagnosis: Pre-Check
- POWER WINDOW OPERATION MODE NOTE: Initial condition that the customizing function by LEXUS hand-held tester is not chosen is shown.
- Standard:
STANDARD CHARTPower window operation Ignition switch ON Ignition switch OFF Operative after key-OFF Ignition switch OFF Inoperative after key-OFF Manual UP Operative Jam protection function operative Inoperative Manual DOWN Operative Operative Inoperative AUTO UP Jam protection function operative Jam protection function operative Inoperative AUTO DOWN Operative Operative Inoperative UP interlocked with key operation Inoperative Jam protection function operative Jam protection function operative DOWN interlocked with key operation Inoperative Operative Operative UP interlocked with wireless operation Inoperative Inoperative Inoperative DOWN interlocked with wireless operation Inoperative Operative Operative - POWER WINDOW FAIL-SAFE FUNCTION
- When an abnormality is detected in the limit switch and pulse sensor for operating the jam protection function (DTC: B1231/31, B1232/32, B1233/33, B1234/34), the following power window operations will be prohibited for fail-safe.
Standard:
STANDARD CHARTPower window operation Ignition switch ON Ignition switch OFF Operative after key-OFF Ignition switch OFF Inoperative after key-OFF Manual UP Operative Operation prohibited - Manual DOWN Operative Operation prohibited - AUTO UP Operation prohibited Operation prohibited - AUTO DOWN Operation prohibited Operation prohibited - UP interlocked with key operation - Operation prohibited Operation prohibited DOWN interlocked with key operation - Operation prohibited Operation prohibited UP interlocked with wireless operation - Operation prohibited Operation prohibited DOWN interlocked with wireless operation - Operation prohibited Operation prohibited
NOTE: In case of normal limit switch, prohibition (fail-safe function) will be cancelled by fully opening the door glass of fully-closed by manual operation then AUTO operation will be possible. - When an abnormality is detected in the limit switch and pulse sensor for operating the jam protection function (DTC: B1231/31, B1232/32, B1233/33, B1234/34), the following power window operations will be prohibited for fail-safe.
- INSPECTION WITH LEXUS HAND-HELD TESTER
- ECU Data Monitor:
- Make a judgement of good or bad and find out a malfunctioning part by the ECU data monitor.
Standard:
Door ECU (driver's side) (switch condition)
STANDARD CHARTItem Inspecting condition Standard value Driver's side power window AUTO switch Pressed --> Not pressed ON/OFF Jam protection limit switch Power window full-open --> full-close ON/OFF Passenger's side power window remote AUTO Pressed --> Not pressed ON/OFF Standard:
Door ECU (passenger's side) (switch condition)
STANDARD CHARTItem Inspecting condition Standard value Passenger's side power window AUTO switch Pressed --> Not pressed ON/OFF Jam protection limit switch Power window full-open --> full-close ON/OFF Door ECU (driver's side, passenger's side) (jam protection threshold)
STANDARD VALUE SPECIFICATIONItem Inspecting condition Standard value Window full-close position --> 1 / 4 open position Power window is going UP by manual operation OK/CAUTION (1) Window 1 / 4 open position --> 2 / 4 open position Power window is going UP by manual operation OK/CAUTION (1) Window 2/4 open position --> 3 / 4 open position Power window is going UP by manual operation OK/CAUTION (1) Window 3 / 4 open position --> full-open position Power window is going UP by manual operation OK / CAUTION (1) (1) "CAUTION" is indicated when something caught in the window is detected. - Active Test:
- Make a judgement of good or bad and find out a malfunctioning part by the active test.
Standard:
Door ECU (driver's side, passenger's side)
STANDARD CHARTItem Operation Power window UP/DOWN - Customizing Function (reference):
- Select the following controls on power window.
Standard:
- Select the following controls on power window.
Door ECU (driver's side)
STANDARD CHARTItem Setting Power window UP interlocked with door operation With / Without function Power window DOWN interlocked with door operation With / Without function - ECU Data Monitor: