Inspection Procedure

INSPECT POWER WINDOW FUNCTION
1. Check that the power window operates via each regulator switch.
  1. If the driver's side does not operate, proceed to "NG-A".
  2. If the passenger's side does not operate, proceed to "NG-B".
1. NG-A: GO TO FLOW CHART (See WINDOW CANNOT BE OPERATED VIA REGULATOR SWITCH IN DRIVER'S SIDE (POWER WINDOW MASTER SWITCH CIRCUIT) )
2. NG-B: GO TO FLOW CHART (See WINDOW CANNOT BE OPERATED VIA REGULATOR SWITCH IN PASSENGERS SIDE (REGULATOR SWITCH CIRCUIT) )
3. OK: Go to next step
INSPECT POWER WINDOW FUNCTION
1. Check that the passenger's power window operates via the remote operation of the master switch.
1. NG: GO TO FLOW CHART (See REMOTE OPERATION VIA MASTER SWITCH IS IMPOSSIBLE IN THE OTHER SEAT(OPERATION VIA EACH DOOR SWITCH IS POSSIBLE) )
2. OK: REPLACE MULTIPLEX NETWORK DOOR ECU FRONT LH