Front Extension Housing: Disassembly

WARNING: This page is about a different car, the 2003 Lexus LX 470. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE DRIVE CLUTCH HUB
1. Using a snap ring expander, remove the snap ring.
2. Using SST, remove the drive clutch hub.
  SST 09950-40011 (09951-04020, 09952-04010, 09953-04030, 09954-04020, 09955-04021, 09957-04010, 09958-04011)
  
  Fig 1: Removing Drive Clutch Hub
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FRONT OUTPUT SHAFT
Using a plastic hammer, drive out the front output shaft.

Fig 2: Drive Out Front Output Shaft
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE DUST DEFLECTOR
1. Using SST, remove the dust deflector.
  SST 09950-40011 (09951-04020,09952-04010,
  
  09953-04030, 09954-04010, 09955-04051,
  
  09957-04010, 09958-04011)
  
  Fig 3: Removing Dust Deflector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Using a screwdriver and hammer, tap the dust deflector and remove it from the extension housing.
  
  Fig 4: Removing Dust Deflector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE OIL SEAL
Using a screwdriver, pry out the oil seal from the front extension housing.

Fig 5: Pry Out Oil Seal From Front Extension Housing
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE BALL BEARING
1. Using a screwdriver, remove the snap ring.
  
  Fig 6: Removing Snap Ring
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Using SST and a press, remove the ball bearing.
  SST 09316-60011 (09316-00011, 09316-00071)
  
  Fig 7: Removing Ball Bearing
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002