Customer Supplied Two Or More Valid Keys
- Cut new transponder equipped key(s). Using first valid key, turn ignition switch to ON position, then LOCK position 5 times. DO NOT leave key in either position for more than one second. Turn first valid key to ON position. SECURITY light should illuminate. Turn first valid key to LOCK position and remove key from ignition. SECURITY light should go out.
- Using second valid key, start engine. SECURITY light should illuminate for 1-2 seconds and engine should continue to run. Turn second new key to LOCK position and remove key.
- Repeat step 2 with new third key. Repeat step 2 with each new key, up to 8 keys total. Waiting 30 seconds will cause program to quit automatically.