Customer Supplied 2 Or More Valid Keys
- Remove old steering lock. See STEERING LOCK under REMOVAL & INSTALLATION in appropriate IMMOBILIZER SYSTEMS article. Connect new steering lock to ignition switch connector. Connect old steering lock to coil connector.
- Insert valid first key into old steering lock. Insert new key into new steering lock. Turn new key to ON position, then LOCK position 5 times. DO NOT leave key in either position for more than one second. Turn new key to ON position. SECURITY light should illuminate. Turn new key to LOCK position. SECURITY light should go out.
- Remove valid first key from old steering lock. Place valid second key into old steering lock. Using new key, start engine. SECURITY light should illuminate for 1-2 seconds and engine should continue to run. Turn new key to LOCK position.
- Disconnect coil connector from old steering lock and reconnect into new steering lock. Using new key, start engine. SECURITY light should illuminate for 1-2 seconds and engine should continue to run. Turn new key to LOCK position and remove key.
- Repeat step 4 with each new key. Waiting 30 seconds will cause program to quit automatically. Complete installation of steering lock.