LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2003 >> ES 300 >> Repair and Diagnosis >> Brakes >> Anti-Lock Brakes >> Steering Sensor >> Steering Sensor >> Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Steering Sensor: Replacement

NOTE: For steps  1 - 19 , see SPIRAL CABLE .
  1. PRECAUTION 
  2. SEPARATE BATTERY NEGATIVE TERMINAL 
  3. PLACE FRONT WHEELS FACING STRAIGHT AHEAD 
  4. REMOVE HORN BUTTON ASSY  
  5. REMOVE STEERING WHEEL ASSY 
  6. REMOVE STEERING COLUMN LOWER COVER 
  7. REMOVE SPIRAL CABLE SUB-ASSY 
  8. REMOVE WINDSHIELD WIPER SWITCH ASSY 
  9. REMOVE STEERING SENSOR 
  10. INSTALL STEERING SENSOR 
  11. INSPECT SPIRAL CABLE SUB-ASSY 
    1. If the following condition is identified, replace the spiral cable sub-assy with new one.

      Condition: 

      Scratches or cracks on the connector 

      Cracks, dents or chipping of the spiral cable sub-assy 

  12. INSTALL WINDSHIELD WIPER SWITCH ASSY 
  13. PLACE FRONT WHEELS FACING STRAIGHT AHEAD 
  14. INSTALL SPIRAL CABLE SUB-ASSY 
  15. INSTALL STEERING COLUMN LOWER COVER 
  16. CENTER SPIRAL CABLE 
  17. INSTALL STEERING WHEEL ASSY 
  18. INSPECT STEERING WHEEL CENTER POINT 
  19. INSTALL HORN BUTTON ASSY 
  20. INSPECT SRS WARNING LIGHT(See  SYSTEM OPERATION CHECK  ) 
scientia non olet · About LEMON Manuals