Transaxle Specifications
TRANSAXLE SPECIFICATIONS
| Application | In. (mm) | |
|---|---|---|
| Bushing Inside Diameter (Maximum) | ||
| Multiple Disc Clutch Hub | .909 (23.09) | |
| Oil Pump Body | 1.503 (38.18) | |
| Oil Pump Stator Shaft | .849 (21.57) | |
| Overdrive Direct Clutch Drum | .909 (23.09) | |
| Underdrive Clutch Drum | 1.462 (37.13) | |
| End Play | ||
| Direct Clutch | .010-.036 (.26-.92) | |
| Input Shaft | .010-.049 (.26-1.24) | |
| Underdrive Planetary Gear Assembly | .020-.039 (.50-.99) | |
| Oil Pump | ||
| Driven Gear-To-Body Clearance | .0039-.0067 (.100-.170) | |
| Driven Gear-To-Drive Gear Tooth Clearance | .0028-.0059 (.170-.150) | |
| Gear Side Clearance | .0008-.0020 (.020-.050) | |
| Piston Stroke | ||
| Forward Clutch | .039-.049 (1.00-1.25) | |
| Overdrive Direct Clutch | .024-.033 (.61-.83) | |
| Reverse Clutch | .024-.032 (.60-.82) | |
| Underdrive Brake | .071-.087 (1.81-2.20) | |
| Underdrive Clutch | .059-.067 (1.51-1.71) | |
| 1st & Reverse Brake | .046-.053 (1.16-1.35) | |
| 2nd Brake | .024-.036 (.62-.91) | |
| Side Gear Backlash | .002-.008 (.05-.20) | |
| Torque Converter Runout (Maximum) | ||
| Drive Plate | .008 (.20) | |
| Sleeve | .012 (.30) | |
CLUTCH DISC & PLATE QUANTITY
| Component | Discs | Plates |
|---|---|---|
| Forward Clutch | 5 | 5 |
| Overdrive Direct Clutch | 4 | 4 |
| Reverse Clutch | 3 | 3 |
| Underdrive Brake | 4 | 4 |
| Underdrive Clutch | 4 | 4 |
| 1st & Reverse Brake | 6 | 6 |
| 2nd Brake | 4 | 4 |