Service Data
SFI SERVICE SPECIFICATIONS (2JZ-GE)
| Fuel pressure regulator | Fuel pressure | 301 - 347 kPa (3.1 - 3.5 kgf/cm2 , 44 - 50 psi) | |
| Fuel pump | Resistance | at20°C(68°F) | 0.2- 3.0 ohm |
| Injector | Resistance | at20°C(68°F) | 13.4 - 14.2 ohm |
| Injection volume | 60 - 73 cm3 (3.7 - 4.5 cu in.) per 15 sec. | ||
| Difference between each cylinder | 13 cm3 (0.8 cu in.) or less | ||
| Fuel leakage | 1 drop or less per 12 minutes | ||
| MAF meter | Resistance (THA - E2) | at -20 °C (-4°F) | 13.6 - 18.4kohm |
| at20°C(68°F) | 2.21 - 2.69 kohm | ||
| at60°C(140°F) | 0.49 - 0.67 kohm | ||
| Throttle body | Throttle body fully closed angle | 3.5ohm | |
| Throttle control motor | Motor (M+-M-) | at20°C(68°F) | 0.3-100 ohm |
| Clutch (CL+-CL-) | at20°C(68°F) | 4.2- 5.2 ohm | |
| Throttle position sensor | Resistance (VC - E2) | at 20 ° C (68° F) | 1.2-3.2 kohm |
| Throttle valve opening percentage | STD | 15.6 +/- 1.2 % | |
| Accelerator pedal position sensor | Resistance (VC - E2) | at 20 °C (68° F) | 1.2 -3.2 kohm |
| Accelerator pedal position voltage | STD | 0.3-0.9 V | |
| Camshaft timing oil control valve | Resistance | at20°C (68°F) | 5.5-12ohm |
| VSV for EVAP | Resistance | at 20 °C (68°F) | 33 - 39 ohm |
| VSV for acoustic control induction system (ACIS) | Resistance | at20°C(68°F) | 38.5 - 44.5 ohm |
| VSV for canister closed valve (CCV) | Resistance | at 20 ° C (68° F) | 24 - 30 ohm |
| VSV for Pressure switching valve | Resistance | at 20 °C (68°F) | 33 - 39 ohm |
| ECT sensor | Resistance | at-20°C (-4°F) | 10 - 20 kohm |
| 0°C(32°F) | 4 - 7 kohm | ||
| 20°C(68°F) | 2 - 3 kohm | ||
| 40°C(104°F) | 0.9 - 1.3 kohm | ||
| 60°C(140°F) | 0.4 - 0.7 kohm | ||
| 80°C(176°F) | 0.2 - 0.4 kohm | ||
| Vapor pressure sensor | Power sorce voltage | 4.5 - 5.5 V | |
| Heated oxygen sensor | Heater coil resistance | at 20 °C (68°F) | 11 - 16ohm |
| Fuel cut rpm | Fuel return rpm | 1,000 rpm | |