Torque Specification
SFI TIGHTENING TORQUE SPECIFICATIONS (2JZ-GE)
| Part tightened | N.m | kgf.cm | ft.lbf | |
|---|---|---|---|---|
| Fuel line | for union bolt | 29 | 300 | 22 |
| or flare nut (for using SST) | 38 (30) | 387 (310) | 28 (22) | |
| Fuel tank vent tube set plate x Fuel tank | 3.5 | 36 | 31 in..lbf | |
| Fuel inlet hose x Body | 9.0 | 90 | 80 in..lbf | |
| Delivery pipe x Intake manifold | 21 | 210 | 15 | |
| Fuel pressure pulsation damper x Fuel pipe support | 32.5 | 325 | 24 | |
| Fuel inlet pipe x Intake manifold | 9.0 | 90 | 80 in..lbf | |
| No.2 vacuum pipe x Intake manifold | 21 | 210 | 15 | |
| Fuel sender gauge x Fuel tank | 1.5 | 15 | 13 in..lbf | |
| Fuel tank band x Body | 39 | 400 | 31 | |
| MAF meter x Air cleaner | 10.7 | 109 | 8 | |
| Throttle body bracket x Throttle body | 21 | 210 | 15 | |
| Throttle body bracket x Cylinder head | 21 | 210 | 15 | |
| Throttle position sensor x Throttle body | 1.7 | 17.5 | 15 in..lbf | |
| Throttle control motor x Throttle body | 3.7 | 37.5 | 33 in..lbf | |
| Throttle control motor cover x Throttle body | 1.7 | 17.5 | 15 in..lbf | |
| Accelerator pedal position sensor x Throttle body | 3.7 | 37.5 | 33 in..lbf | |
| Camshaft timing oil control valve x No.3 camshaft bearing cap | 8.0 | 80 | 71 in..lbf | |
| No.3 timing belt cover x Cylinder head cover | 8.0 | 80 | 71 in..lbf | |
| Intake air connector x Air intake chamber | 28 | 280 | 21 | |
| Air intake chamber x Intake manifold | 28 | 280 | 21 | |
| Vacuum control valve set x Intake manifold | 21 | 210 | 15 | |
| ECT sensor x Cylinder head | 19.6 | 200 | 14 | |
| Knock sensor x Cylinder block | 44 | 450 | 33 | |
| PS pump rear stay x Manifold stay | 39.2 | 400 | 29 | |
| PS pump rear stay x PS pump bracket | 39.2 | 400 | 29 | |
| Heated oxygen sensor x Exhaust manifold | 45 | 450 | 33 | |
| Heated oxygen sensor x Front exhaust pipe | 45 | 450 | 33 | |