Acceleration Sensor ASSY: Replacement

WARNING: This page is about a different car, the 2003 Lexus GX 470. However, it is still accessible from the selected car via links, so may be relevant.

HINT:

LOCATION: See ELECTRICAL COMPONENT LOCATOR

REMOVE REAR NO. 2 SEAT ASSY LH (See REAR NO. 2 SEAT )
REMOVE QUARTER SCUFF PLATE INSIDE LH )
REMOVE REAR DOOR SCUFF PLATE LH )
REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH )
REMOVE BACK DOOR WEATHERSTRIP )
REMOVE REAR FLOOR MAT SUPPORT PLATE REAR )
REMOVE QUARTER INSIDE TRIM BOARD LH
REMOVE ACCELERATION SENSOR ASSY
1. Disconnect the connector.
2. Remove a clip, bolt and the acceleration sensor assy.
  
  Fig 1: Removing Clip, Bolt And Acceleration Sensor Assy
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL ACCELERATION SENSOR ASSY
1. Install the acceleration sensor assy with a clip and a bolt.
  Torque: 7.8 N.m (80 kgf.cm, 69 in.lbf)
2. Connect the connector.
INSTALL REAR NO. 2 SEAT ASSY LH (See REAR NO. 2 SEAT )