Wiper/Washer Switch (Front)
Inspect the front wiper and washer switch continuity. See CONNECTOR IDENTIFICATION . See INSPECTING FRONT WIPER/WASHER SWITCH CONTINUITY table. If continuity is not as specified, replace the switch. See WIPER/WASHER SWITCH under REMOVAL & INSTALLATION.
INSPECTING FRONT WIPER/WASHER SWITCH CONTINUITY
| Switch Position | Tester Connection | Specified Condition |
|---|---|---|
| OFF | 7 - 16 | Continuity |
| INT | 7 - 16 | Continuity |
| LO | 7 - 17 | Continuity |
| HI | 8 - 17 | Continuity |
| Washer OFF | - | No Continuity |
| Washer ON | 2 - 11 | Continuity |