Generator Specifications
WARNING: This page is about a different car, the 2004 Toyota 4Runner and 2003 Toyota 4Runner. However, it is still accessible from the selected car via links, so may be relevant.
GENERATOR SPECIFICATIONS
| Application | Specification | ||||
|---|---|---|---|---|---|
| Brush Length | |||||
| Standard | .413 in. (10.5 mm) | ||||
| Limit (Minimum) | More Than .177 in. (4.5 mm) | ||||
| Rotor | |||||
| Resistance (1) | 2.3-2.7 ohms | ||||
| Slip Ring Diameter | |||||
| Standard | .559-.567 Inches (14.2-14.4 mm) | ||||
| Minimum | .551 Inches (14.0 mm) | ||||
| Generator Regulated Output | |||||
| Amperage | |||||
| Without Load | 10 Or Less Amps | ||||
| With Load | 30 Or More Amps | ||||
| Voltage | |||||
| V6 model | 13.2-14.0 Volts | ||||
| V8 model | 13.2-14.8 Volts | ||||
|
|||||