How To Proceed With Troubleshooting
WARNING: This page is about a different car, the 2003 Toyota 4Runner. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Troubleshoot in accordance with the procedure on the following pages.
- Vehicle Brought To Workshop
- Problem Symptom Confirmation
- If the symptom does not occur, proceed to A.
- If the symptom occurs, proceed to B.
- A : Symptom Simulation
- B : Go To Next Step
- See PROBLEM SYMPTOMS TABLE
- Inspection ( PRE-CHECK )
- Identification Of Problem
- Repair Or Replace
- Confirmation Test
END
Before troubleshooting:
- Using the tester, check the battery voltage.
Standard Voltage: 10 - 14 V
- Perform a visual check for blown fuses, and poor connections in connectors.