Section 900 (Engine Control System (SFI) (1GR-FE)): Precaution
WARNING: This page is about a different car, the 2005 Toyota 4Runner. However, it is still accessible from the selected car via links, so may be relevant.
- INITIALIZATION NOTE:
- Perform the RESET MEMORY (AT initialization) when replacing the automatic transmission assy, engine assy or ECM (see INITIALIZATION ).
- Perform the REGISTRATION (VIN registration) when replacing the ECM (see REGISTRATION ).
HINT:
RESET MEMORY can not be completed by only removing the battery.
- FOR USING HAND-HELD TESTER
NOTE:
Observe the following items for safety reasons:
- Read its instruction books before using the tester.
- Prevent the tester cable from being caught on the pedals, shift lever and steering wheel when driving with the tester connected to the vehicle.
- When driving the vehicle for testing purposes using the tester, two persons are required. One is for driving the vehicle, and the other operates the tester.