Torque Specification

TORQUE SPECIFICATION

Part tightened	N.m	kgf.cm	ft.lbf
Oil pressure switch x Cylinder block	13	130	9
No.2 oil pan x Drain plug	45	460	33
Oil pump x Relief valve plug	49.1	500	36
Oil pump x Cylinder block 10 mm head 12 mm head	8	80	69 in.lbf
Oil pump x Cylinder block 10 mm head 12 mm head	19.5	200	14
Crankshaft position sensor x Oil pump	8	80	69 in.lbf
Oil pan baffle plate x No.1 oil pan	8	80	69 in.lbf
No.1 oil pan x Cylinder block	19.5	200	14
No.1 oil pan x Oil pump 10 mm head 12 mm head	8	80	69 in.lbf 14
No.1 oil pan x Oil pump 10 mm head 12 mm head	19.5	200
No.1 oil pan x Rear oil seal retainer	8	80	69 in.lbf
No.1 oil pan x Transaxle	37.2	380	27
Oil strainer x Main bearing cap	8	80	69 in.lbf
Oil strainer x Oil pump	8	80	69 in.lbf
No.2 oil pan x No.1 oil pan	8	80	69 in.lbf
Flywheel housing under cover x Transaxle	7.8	80	69 in.lbf
A/C compressor housing bracket x Cylinder block	25	250	18
PS pump x PS pump bracket	43.1	440	32
PS pump drive belt adjusting strut x PS pump	43.1	440	32
PS pump drive belt adjusting strut x Oil pump	43.1	440	32
WU-TWC x LH exhaust manifold	62	630	46
No.2 front exhaust pipe x WU-TWC	56	560	41
No.2 front exhaust pipe x Front exhaust pipe	56	560	41