Inspection Procedure
WARNING: This page is about a different car, the 2004 Lexus ES 330. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK OUTER REAR VIEW MIRROR ASSY LH (FROM UPPERMOST POSITION TO LOWERMOST POSITION MIRROR SENSORS VOLTAGE)
- Check the mirror position sensors operation.
- Connect the positive lead from the voltmeter to terminal VSSR (M3-2) and the negative lead to terminal E1 (M3-8).
- Check that the voltage gradually changes according to Fig 2 below while the mirror moves from the uppermost position to lowermost position.
Standard
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
NG: REPLACE OUTER REAR VIEW MIRROR ASSY LH
OK: Go to next step.
- Check the mirror position sensors operation.
- CHECK OUTER REAR VIEW MIRROR ASSY LH (FROM LEFT-MOST POSITION TO RIGHT-MOST POSITION MIRROR SENSORS VOLTAGE)
- Check the mirror position sensors operation.
- Connect the positive lead from the voltmeter to terminal HSRL (M3-7) and the negative lead to terminal E1 (M3-8).
- Check that the voltage gradually changes according to Fig 4 below while the mirror moves from the left-most position to right-most position.
Standard
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
NG: REPLACE OUTER REAR VIEW MIRROR ASSY LH
OK: Go to next step.
- Check the mirror position sensors operation.
- CHECK WIRE HARNESS (OUTER MIRROR CONTROL ECU - OUTER REAR VIEW MIRROR LH)
- Disconnect the M3 outer rear view mirror and M2 outer mirror control ECU connectors.
- Check the continuity between connectors.
Standard
NG: REPAIR OR REPLACE WIRE HARNESS AND CONNECTOR
OK: REPLACE OUTER MIRROR CONTROL ECU ASSY
- CHECK OUTER REAR VIEW MIRROR ASSY RH (FROM UPPERMOST POSITION TO LOWERMOST POSITION MIRROR SENSORS VOLTAGE)
- Check the mirror position sensors operation.
- Connect the positive lead from the voltmeter to terminal VSSR (2) and the negative lead to terminal E1 (8).
- Check that the voltage gradually changes according to Fig 8 below while the mirror moves between the uppermost position and lowermost position.
Standard
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
NG: REPLACE OUTER REAR VIEW MIRROR ASSY RH
OK: Go to next step.
- Check the mirror position sensors operation.
- CHECK OUTER REAR VIEW MIRROR ASSY RH (FROM UPPERMOST POSITION TO LOWERMOST POSITION MIRROR SENSORS VOLTAGE)
- Check the mirror potion sensors operation.
- Connect the positive lead from the voltmeter to terminal HSSR (7) and the negative lead to terminal E1 (8).
- Check that the voltage gradually changes according to the Fig 10 below while the mirror moves between the left-most position and right-most position.
Standard
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
NG: REPLACE OUTER REAR VIEW MIRROR ASSY RH
OK: Go to next step.
- Check the mirror potion sensors operation.
- CHECK WIRE HARNESS (OUTER MIRROR CONTROL ECU - OUTER REAR VIEW MIRROR RH)
- Disconnect the M4 outer rear view mirror and M2 outer mirror control ECU connectors.
- Check the continuity between connectors.
Standard
NG: REPAIR OR REPLACE WIRE HARNESS AND CONNECTOR
OK: REPLACE OUTER MIRROR CONTROL ECU ASSY