Cruise Control Main Switch ASSY: Replacement
- DISCONNECT BATTERY NEGATIVE TERMINAL (See AIR BAG SAFETY PRECAUTIONS
)
- PLACE FRONT WHEELS FACING STRAIGHT AHEAD
- REMOVE STEERING WHEEL COVER LOWER NO. 2
- REMOVE CONNECTOR COVER (See REPLACEMENT
)
- REMOVE HORN BUTTON ASSY (See DRIVER-SIDE AIR BAG MODULE
)
- REMOVE STEERING WHEEL ASSY (See OVERHAUL
)
- REMOVE STEERING PAD SWITCH (See REPLACEMENT
)
- REMOVE CRUISE CONTROL MAIN SWITCH ASSY
- Remove the 3 screws.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- Reverse the steering wheel, remove the 3 screws and cruise control main switch assy.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- Disengage the wiring pins other than the cruise control main switch assy from the connector, and pull them out.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- CENTER SPIRAL CABLE (See
SPIRAL CABLE
)
- INSTALL STEERING WHEEL ASSY (See OVERHAUL
)
- INSPECT STEERING WHEEL CENTER POINT
- INSTALL HORN BUTTON ASSY (See
DRIVER-SIDE AIR BAG MODULE
)
- INSPECT HORN BUTTON ASSY (See SYSTEM OPERATION CHECK
)
- INSPECT SRS WARNING LIGHT (See
DIAGNOSTICS
)