Torque Specification
STARTING AND CHARGING SYSTEM TORQUE SPECIFICATION
| Part Tightened | N.m | kgf.cm | ft.lbf |
|---|---|---|---|
| Starter assy x Transaxle housing | 37 | 380 | 26 |
| Starter wire x Starter assy | 9.8 | 100 | 7 |
| Air cleaner inlet No. 1 x Body | 7.0 | 71 | 62 in..lbf |
| Air cleaner bracket x Body | 12 | 122 | 9 |
| Air cleaner case sub-assy x Air cleaner bracket | 5.0 | 51 | 44 in..lbf |
| Air cleaner case sub-assy x Body | 5.0 | 51 | 44 in..lbf |
| Air cleaner cap sub-assy x Air cleaner case sub-assy | 5.0 | 51 | 44 in..lbf |
| Battery clamp sub-assy x Body | 9.0 | 92 | 79 in..lbf |
| Battery clamp sub-assy x Battery clamp bolt | 3.5 | 36 | 31 in..lbf |
| Terminal x Battery | 5.4 | 55 | 48 in..lbf |
| Air cleaner inlet assy x Body | 7.0 | 71 | 62 in..lbf |
| Starter assy | |||
| Starter field frame assy x Starter drive housing assy | 6.0 | 61 | 53 in..lbf |
| Starter magnetic switch assy x Starter drive housing assy | 7.5 | 76 | 66 in..lbf |
| Lead wire x Starter magnetic switch assy | 10 | 102 | 7 |
| Generator assy x Wiring harness clamp bracket | 8.4 | 86 | 74 in..lbf |
| Generator assy x Generator bracket No. 1 | 58 | 591 | 43 |
| Generator assy x Generator belt adjusting bar | 18 | 184 | 13 |
| Generator wire x Generator assy | 9.8 | 100 | 7 |
| Generator assy | |||
| Generator coil assy x Drive end frame assy generator | 5.8 | 59 | 51 in..lbf |
| Generator brush holder assy x Generator coil assy | 1.8 | 18 | 16 in..lbf |
| Generator rear end cover x Generator coil assy | 4.6 | 47 | 41 in..lbf |
| Generator pulley x Generator rotor assy | 111 | 1,125 | 81 |